DIRECTIONS FOR USE :
( Shake well before use )
1. Change the old engine oil and oil filters .
2. Turn the engine off.
3. Unscrew the oil reservoir cap and pour the content of the CLAYHORSE Additives into the engine's inlet. Close the oil reservoir cap.
4. Operate the engine in normal modes.
DOSAGE:
The adding volume of CLAYHORSE Additives concentrate
liquid is 10ml for 400CC-900CC engine.
20ml CLAYHORSE additives for 1000CC engine and above.
ATTENTION:
1 Refurnish the engine oil timely and routinely. But no oil change is needed within the initial 500 miles of driving.
2 It is strongly recommended that certified oil filters be selected and installed which would otherwise damage the CLAYHORSE Additives effectiveness.
3 If recondition of operation parameters of engines cannot be available, the second CLAYHORSE Additives is recommended by observing the procedures stated above.
If no satisfactory recondition results can be attained after the CLAYHORSE Additives , the sole reason is that there is inappropriate technical estimation of the engine conditions.
CAUTION:
Keep out of reach of children.
Wash skin thoroughly with soap and water after contact.
ZAICHENG NOVEL MATERIALS LTD
#8 99-E, Guomao Street, Ganjingzi District, Dalian, China
TEL: 86-411-84528309 FAX: 86-411-84528309
ZAICHENG NOVEL MATERIALS LTD#8 99-E, Guomao Street, Ganjingzi District, Dalian, ChinaTEL: 86-411-84528309 FAX: 86-411-84528309